As a Mustang owner, keeping your car in top condition is a top priority. Whether you’re performing routine maintenance or making upgrades, it’s important to know where to place your jack stands to ensure your safety and prevent damage to your vehicle. But with so many different jacking points on a 2014 Mustang, it can be hard to know where to begin.
In this blog, we’ll explore the different places you can place jack stands on your 2014 Mustang, so you can get the job done right the first time, every time. So, grab a cup of coffee and let’s dive into the world of jack stands and Mustangs.
Step One: Locate the Jack Points
If you’re wondering where to place your jack stands on a 2014 Mustang, the first step is to locate the jack points. These are specifically designed and reinforced areas where the jack stands can safely hold the weight of the car without causing damage. For the 2014 Mustang, the recommended jack points can be found in the owner’s manual, but they are generally located beneath the car’s frame rail or near the suspension arms.
Be sure to avoid placing the jack stands on areas that are not designed for them, such as the exhaust pipes or other vulnerable parts that could crumble or dent under the car’s weight. When in doubt, it’s always best to consult a professional or refer to the owner’s manual to ensure you’re placing the jack stands in the correct position. Remember, safety should always be your number one priority when working on your vehicle.
Locate the front jack point on the frame
One of the first steps in safely jacking up a vehicle is to locate the designated jack points on the frame. These jack points are specifically designed to handle the weight of the vehicle without causing damage to the body or suspension components. To locate the front jack point, start by checking the owner’s manual or consulting a repair manual to find out where it’s located on your specific vehicle.
Typically, the front jack point is located near the front wheels, either behind or in front of the wheel well. Look for a reinforced section of the frame that’s designed for lifting and make sure to avoid any areas that could potentially collapse or cause damage to the vehicle. Once you’ve located the front jack point, double-check that it’s positioned correctly before proceeding with jacking up the vehicle.
By taking the time to properly locate the front jack point, you can ensure that you’re lifting your vehicle safely and avoiding any unnecessary damage.
Locate the rear jack point on the frame
When you need to raise the rear end of your car, finding the right jack point can be a bit confusing. However, it’s essential to locate the proper jack point to avoid causing damage to your vehicle. The rear jack point is typically located near the rear wheels’ arches, along the frame’s underside.
To ensure you have located the correct spot, look for any markings or notches on the frame; these markings may indicate the jack point’s exact location. If you can’t find any visible signs, consult your vehicle’s manual, as it should have detailed information on where the rear jack point is located. Remember always to double-check the location before lifting your vehicle to prevent any mishaps or accidents.
Using the right jack point will guarantee your car remains stable and secure during maintenance, repairs, or tire changing.
Step Two: Prepare the Vehicle
When it comes to lifting a 2014 Mustang, safety is the top priority. Before you start lifting your vehicle with a jack, it’s important to determine where to place jack stands to support the car’s weight. You want to ensure that the jack stands are in a stable position, and the weight of the vehicle is distributed evenly.
In most cases, the recommended locations for jack stands are the designated lift points outlined in your Mustang’s owner’s manual. These locations are built into the body of the vehicle and are designed to safely support the weight of the car without damaging any critical components. It’s important to follow the manufacturer’s instructions carefully to avoid any accidents or damage to your vehicle.
Once you’ve located the lift points, simply slide the jack stands under the designated areas and raise them until they make contact with the frame. Double-check that the stands are secure before you start any work on your car. With the jack stands securely in place, you’ll have the peace of mind to work on your vehicle safely and efficiently.
Place the vehicle in park or in gear and set the emergency brake
When it comes to driving, safety should always be a priority. Before hitting the road, it’s essential to prep the vehicle properly, and that includes setting the emergency brake. Whether you’re on a hill or a flat surface, parking in gear or in park with the emergency brake set will prevent the car from rolling away accidentally.
This is especially crucial for manual transmission vehicles since they tend to roll more than automatic transmissions. Setting the emergency brake also helps to prolong the life of your transmission and prevents unnecessary wear and tear. So, be sure to make it a habit to set the emergency brake every time you park the car, no matter how short the duration.
Remember, it’s better to take a few seconds to do it properly than to face the consequences of an accident caused by a rolling vehicle. Always prioritize safety and responsible driving.
Chock the front and rear wheels
Chocking the front and rear wheels is an important step to prepare your vehicle before working on it. This simple but crucial task ensures that your car stays in place and doesn’t roll away while you’re working on it. To chock the wheels, simply place wheel chocks or bricks on the front and rear tires on the opposite side of the wheel that you’re working on.
This prevents the car from moving and ensures your safety during repairs. While it may seem like an insignificant step, chocking the wheels can prevent accidents and is necessary for your safety. Don’t forget to always double-check that the chocks are secure before you start working on your car.
Taking the extra time to chock the wheels can save you from potential damage and accidents later on. Keyword: chock the wheels.
Step Three: Place the Jack Stands
Now that your 2014 Mustang is lifted safely with the hydraulic jack, it’s time to place the jack stands. It’s crucial to find the right place to put them to ensure stability, safety, and prevent any accidents. Make sure to use a flat and solid surface, such as a concrete or asphalt floor, to hold the stands.
Place them under the jacking points, which are located underneath the car, where the suspension meets the frame. These points are designed to hold the weight of your vehicle securely, preventing it from rolling or sliding while you work under it. You can find these points easily in your car’s manual or by checking online forums where Mustang enthusiasts discuss jacking and lifting techniques.
Once you’ve found the right spots, carefully place the jack stands, and double-check that they’re aligned correctly. Don’t forget to lower the hydraulic jack before working under your Mustang, as it can cause the car to fall or shift if left in place. By following these steps, you’ll ensure that your Mustang is stable and secure while you work on it.
Position the jack stand under the front jack point and raise it to the desired height
Now it’s time to place the jack stands under the front jack point and lift your car to the desired height. Choose a sturdy jack stand that can support your vehicle’s weight without wobbling or collapsing. Position the jack stand at the appropriate spot and make sure it is level and centered.
Double-check the stability of the jack stand and ensure that it is securely in place. It’s better to be safe than sorry, so don’t rush this part. Once you’re confident that the jack stand is set up correctly, pump it up slowly until your car is properly raised.
That way, you can comfortably change the tires, work on the brakes, or perform other maintenance tasks without putting yourself in danger. Remember, safety should always be your top priority when using a jack stand. Take your time and follow the instructions carefully.
When you’re finished, lower the car gently and remove the jack stands. Congratulations! You’ve successfully placed your jack stands and elevated your car for maintenance or repair.
Repeat the process for the rear jack point
Now that you’ve safely lifted your car using a floor jack, it’s time to place the jack stands. The third step in this process is to position the stands under the front and rear jacking points, making sure they are secure and stable. Remember to use a jack stand that can support your vehicle’s weight, and always double-check to ensure that the stand is secure before releasing the jack.
Repeat this process for the rear jack point, making sure that both sets of jack stands are secure before continuing with any work on your car. Safety is paramount when it comes to jacking up a car, so take your time and be vigilant throughout the process. By following these steps, you can ensure that you’re able to safely and efficiently work on your vehicle without risking injury.
Step Four: Lower the Vehicle onto the Jack Stands
When it’s time to lower your 2014 Mustang onto jack stands, it’s crucial to place them in the right spot to prevent any damage or accidents. First, locate the vehicle’s designated jack points, which are usually marked with an arrow or a notch in the frame. Once you’ve identified the jack points, place the stands directly under them, making sure they are securely in place.
You may also want to consider placing a third jack stand under the vehicle’s differential for extra support. It’s never a good idea to rely solely on the jack to hold the weight of the vehicle, as they are prone to slipping or collapsing. By following these simple steps, you can safely lower your Mustang onto jack stands and perform any necessary maintenance or repairs with confidence.
Slowly lower the vehicle onto the jack stands
As you have successfully secured the jack stands in place and ensured they are at the right height, we can now proceed to lower the vehicle onto them. This can be a tricky process, but with great care and attention to detail, it can be done safely and efficiently. Begin by slowly lowering the vehicle down onto the jack stands, making sure that the pressure is distributed evenly across all the stands.
If the car starts to wobble or feel off-balance, stop immediately and readjust the stands to ensure that the weight is distributed evenly. Remember to keep your hands and feet well clear of the car during this process for your safety. Once the car is resting firmly on the jack stands, give it a gentle shake to ensure everything is stable.
Congratulations, you have now successfully lifted your car onto jack stands and it’s now ready for maintenance or repair work.
Step Five: Test Stability of Vehicle
When it comes to working on your 2014 Mustang, it’s important to know where to place jack stands to ensure the stability and safety of the vehicle. The recommended placement for jack stands is at the designated lift points which can be found in the owner’s manual or on the car itself. These lift points are specifically designed to handle the weight of the vehicle and provide a stable and secure location to place the jack stands.
It’s important not to place the jack stands on any other part of the car, as this can cause damage to the vehicle and make it unstable. Always double-check that the jack stands are securely in place and the vehicle is level before beginning any repairs or maintenance. By taking the time to properly place jack stands, you can ensure the safety of yourself and your vehicle.
Gently shake the vehicle to ensure it is stable and secure on the jack stands
After following the previous steps to properly jack up your vehicle, it’s vital to make sure that it’s secure and stable before starting any work. To do this, gently shake the car to see if it wobbles or shifts at all. If there’s any movement, you need to reposition the jack stands or adjust the jacking height.
Always double-check the stability before getting under the vehicle or working near it. You want to minimize the risk of injury or damage to your car. Think of this step like building a house on a strong foundation.
You don’t want to build the house on a shaky foundation because it might fall apart, and the same goes for working on your car. You need to make sure that it’s stable and secure before proceeding. So, shake it gently and ensure that it’s good to go.
This simple step can avoid accidents and can be a lifesaver for anyone working on a car. Remember to never be too quick or overconfident and always prioritize your safety.
Conclusion: Safe and Proper Placement of Jack Stands is Crucial
When it comes to jack stands and your 2014 Mustang, it’s always better to be safe than sorry. Essentially, you want to place them on the sturdiest and flattest surface possible while avoiding key components like exhaust pipes and brake lines. In the words of Shakespearean wisdom, “To lift or not to lift? That is the question.
” But with the right knowledge and care, you can confidently elevate your ride and tackle any repairs or maintenance with ease. Happy lifting, Mustang enthusiasts!”
FAQs
What is the recommended location to place jack stands for a 2014 Mustang?
The recommended location for placing jack stands on a 2014 Mustang is the factory-approved jacking points located behind the front wheels and in front of the rear wheels.
Is it safe to use the frame as a jack stand point on a 2014 Mustang?
No, it is not recommended to use the frame as a jack stand point on a 2014 Mustang, as it can cause damage to the car’s body or suspension components.
Can I use aftermarket jack stand adapters on a 2014 Mustang?
Yes, using aftermarket jack stand adapters can be a good idea to ensure a proper fit and prevent damage to the car.
How much weight can a standard jack stand hold on a 2014 Mustang?
A standard jack stand can usually hold up to 3 tons of weight, which is more than enough for a 2014 Mustang.
Do I need to use two jack stands for a 2014 Mustang?
Yes, it is recommended to use two jack stands when lifting a car, to ensure maximum safety and stability.
Can I use a hydraulic jack to lift a 2014 Mustang?
Yes, a hydraulic jack can be used to lift a 2014 Mustang, but it should be used in conjunction with jack stands to ensure maximum safety.
Is it important to lower the Mustang onto the jack stands slowly?
Yes, it is important to lower the Mustang onto the jack stands slowly and carefully, to prevent the car from slipping or tilting and causing damage.
